Fabric Information
Linen
Composition: 100% Linen
Printable width: 145cm
Weight: 324gsm
Martindale: 50,000
Fire Rating: AS1530-3 compliant
Application: Cushions, upholstery, soft furnishing
Care: It is recommended washing in cold water, with like colours, wash the item separately for the first time. It is not recommended to use stain removers on natural printed fabrics the print made fade or be damaged. Turning the fabric inside out before washing and drying will improve longevity. Avoid strong detergents, hard spinning, hot or industrial wash. Do not bleach, drip dry – do not wring, do not scrub. Iron on reverse, 3% shrinkage.
Available for usage in covered outdoor areas on request.
Performance
Composition: 100% Polyester
Printable width: 142cm
Weight: 335 gsm
Martindale: 55,000
Fire Rating: AS1530-3, US NFPA 260, Cal TB 117:2013 compliant
Application: Heavy upholstery, cushions, commercial
Care: It is recommended washing separately in warm water in underloaded machine. Avoid thermal shock by cooling down the load gradually particularly after a warm wash and during the rinsing stages. Do not use soap, do not clean with any form of solvents. Use formulated detergents only. Iron temperatures must not exceed 120 degrees and should not be held in one spot for longer than 20 seconds. Tumble dryers should again be underloaded between 25-50%. Load should only be dried to an exhaust air temperature of 80°c. Dry Cleanable at P50. Possible shrinkage 3%
Water repellent coating available on request.
Wallpaper
Content: Alpha cellulose, PVC-free
Printable width: 71cm, supplied untrimmed
Weight: 180 gsm
Fire rating: C-S1, do (Euro EN 13501-1); Class B (ASTM E84-23)
Application: Interior wall covering
Installation: Supplied untrimmed with a 2cm bleed each side for double-cut installation. Good preparation of wall is required, including white undercoat/primer. Paste-on-the-wall method with good quality paste. We recommend using a professional installer.
Care: Washable with soft cloth and soapy water only. Do not scrub.
Type II
Content: Vinyl, non-woven backing treated with long lasting antimicrobial protection.
Printable width: 132 cm, supplied untrimmed
Weight: 450 gsm
Fire rating: B-s1, d0 – according to EN 13501-1 ASTM E84-15a – Class “A” IMO
Application: Interior wall covering suitable for commercial & hospitality environments
Installation: Supplied untrimmed with a 2cm bleed each side for double-cut installation. Good preparation of wall is required, including white undercoat/primer. Paste-on-the-wall method with good quality paste. We recommend using a professional installer.
Care: Washable with soft cloth and soapy water only. Do not scrub.